loading
A Trusted Provider of Smart Industrial Door and Docking Solutions

E-mail: sales@fastlinkchina.com  |  Tel: +86 4008806460

ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler
ELD Dock Leveler

ELD Dock Leveler

The ELD dock leveler provides a safe, efficient, and effective way of handling the unloading process. The ELD dock leveler also makes it easier to load and unload items as it bridges the gap between the surface of the different transportation vehicles and the loading/unloading area. The ELD dock leveler creates a solid ramping area from the back of the truck to the loading area which helps to eliminate accidental damages to items being loaded and/or unloaded.

5.0
design customization

    oops...!

    no product data.

    Go to homepage
    结构图 (9)

    No bottom frame design, fixed support structure is used at the rear of the platform, fixed to the rear of the foundation pit with bolts, and there is no requirement for the bottom of the foundation pit.

    Product Specifications

    SSD-IAS
    SSD-CAS
    SSD-IAS
    SSD-CAS

    A cost-effective choice, also featuring heat insulation and anti-theft functions.

    1 (31)
    1 (31)
    2 (31)
    2 (31)
    3 (25)
    3 (25)
    Optional Requirements Specifications

    Door size

    Minimum dimension W1800mm * H2000mm(5'11''W * 6'7''H)

    Maximum dimension W11500mm * H8000mm(37'9''W * 26'3''H)

    Thickness of door panel 42 mm (1.7")/65 mm (2.6"), for cold storage
    Standard color RAL9002 / RAL9006 / RAL7040 / RAL7045
    Special color Customization
    Standard height 500mm(1'8")
    Door panel weight(including metal accessories) 16 kg/m² for steel door panels; 10 kg/m² for aluminum door panels
    Wind resistant performance(GB/T 7106-2008) Standard configuration, 700 Pa
    Water resistant performance(GB/T 7106-2008) Level 1
    Air permeability performance(GB/T 7106-2008) Level 6
    Window Optional
    Heating window Optional for cold-storage sectional door
    Opening and closing speed 0.25m/s

    A cost-effective choice, also featuring heat insulation and anti-theft functions.

    3 (25)
    3 (25)
    2 (31)
    2 (31)
    修改尺寸后
    修改尺寸后
    Optional Requirements Specifications

    Door size

    Minimum dimension W1800mm * H2000mm(5'11''W * 6'7''H)

    Maximum dimension W11500mm * H8000mm(37'9''W * 26'3''H)

    Thickness of door panel 42 mm (1.7")/65 mm (2.6"), for cold storage
    Standard color RAL9002 / RAL9006 / RAL7040 / RAL7045
    Special color Customization
    Standard height 500mm(1'8")
    Door panel weight(including metal accessories) 16 kg/m² for steel door panels; 10 kg/m² for aluminum door panels
    Wind resistant performance(GB/T 7106-2008) Standard configuration, 700 Pa
    Water resistant performance(GB/T 7106-2008) Level 1
    Air permeability performance(GB/T 7106-2008) Level 6
    Window Optional
    Heating window Optional for cold-storage sectional door
    Opening and closing speed 0.25m/s

    A cost-effective choice, also featuring heat insulation and anti-theft functions.

    3 (25)
    3 (25)
    2 (31)
    2 (31)
    1 (31)
    1 (31)

    A cost-effective choice, also featuring heat insulation and anti-theft functions.

    3 (25)
    3 (25)
    2 (31)
    2 (31)
    1 (31)
    1 (31)

    Performance Characteristics

    B-3 (12)
    The platform countertop is made of anti slip patterned steel plate, with a substrate thickness of 8mm. The bottom structure is reinforced with 8-10 C-shaped steel/I-beams to meet different load-bearing requirements
    B-2 (10)
    High-strength Lip plates are fixed to a self-locking mechanism to ensure load requirements when the platform is in the reset position.
    B-1 (20)
    Strong front crossbeam and fixed support design, with both ends of the fixed support welded to the side of the foundation pit. The fixed support can be adjusted left and right to adapt to the error of the foundation pit.
    5 (16)
    5 (16)
    6 (26)
    6 (26)
    4 (14)
    4 (14)

    Multiple security measures

    Bottom safety sensor: no longer require spiral wires, avoiding entanglement and accidental scratching of bottom sensor.

    Wire rope anti breakage device: When the wire rope breaks, the safety switch can automatically clamp on the track to prevent the door from falling.

    Semi enclosed track handguard design: handguard protection for greater safety, removeable track and secondary track for easy replacement, effectively reducing maintenance costs.

    Built in safety design of steel wire rope: The steel wire rope is placed on the inside of the track, which is not easy to touch and avoids accidental injury

    Highlights of Component Design

    C-5 (9)
    Anti-slip patterned steel plates, with a thickness of 14/15mm, utilize a double 5-degree arch design to increase the overlap area between the lip plate and the vehicle compartment, providing a smoother transition while increasing the load-bearing strength of the lip plate.
    C-3 (14)
    Through-type maintenance support rods effectively support the platform and lip plate, resisting impacts from the front and sides. The support point is located in the middle of the lip plate, and the through-type design enhances safety and impact resistance.
    C-4 (13)
    The rear of the dock leveler adopts a fixed support structure, which is fixed to the rear of the foundation pit with bolts, and there is no requirement for the bottom of the foundation pit.
    C-2 (14)
    Side panels are provided on both sides of the dock leveler to prevent operators' toes from extending beneath the platform and causing injury.
    C-1 (21)
    Self-developed Integrated Intelligent Control System. IP54 protection rating. Rich interfaces.

    Improvement method

    Vertical lifting/high-level lifting/standard lifting(Right Angle lift). Diversified lifting methods to meet installation needs in different spaces

    A-3 (5)
    Vertical lifting
    A-1 (4)
    High-level lifting
    A-2 (7)
    Standard lifting(Right Angle lift)

    Key features of the process

    Our in-house designers and engineers have produced countless great designs for customers from different industries

    D-4-1
    Production uses fully automated production lines, with high production efficiency and guaranteed quality
    D-3 (11)
    Two imported laser cutting machines are used to efficiently cut steel with a processing accuracy of 1mm
    D-2 (15)
    The inverted cylinder design effectively prevents dust accumulation, avoiding wear on the oil seal of the cylinder which can lead to oil leaks, as well as ensuring the reliability of the hydraulic lock valve.
    D-1 (15)
    enclosed tubular hinge increases the contact area with the pin shaft, resulting in greater and more uniform force distribution. The tubular hinge can be lubricated with grease to ensure flexible opening of the lip plate

    Cooperative Case

    Alibaba Long An,BWID Binh Duong, Vietnam SLP, Singapore YCH, JD, Prologis, Sinotrans, Caterpillar

    vbox7163_2L7A3878_152321
    vbox7163_2L7A3878_152321
    4A9A8262
    4A9A8262
    微信图片_202208151506393
    微信图片_202208151506393
    4A9A8291
    4A9A8291

    fAq

    1
    Q: How to choose the length of hydraulic Dock Leveler?
    A: The length of the Dock Leveler mainly depends on the height difference between the carriage floor and the platform height; Platform length L=h (difference between carriage floor height and platform height)/0.125
    2
    Q: What sizes do Dock Leveler usually choose?
    A: Standard Size:W2000mm*L2000mm*H600mm; W2000mm*L2500mm*H600mm.
    3
    Q: Is the installation of the Dock Leveler simple?
    A: Dock Leveler only requires rear support and front measurement to be fixed to the foundation pit. The bottom of the foundation pit does not need to be fixed, making installation simple and without any requirements for the bottom of the foundation pit.
    4
    Q: The difference between dynamic and static loads on the Dock Leveler
    A: Dynamic load: The maximum total weight of forklifts and cargo that can pass through when the Dock Leveler is overlapped with the interior of the carriage for operation
    Static load: The maximum weight of a stationary object that can be placed on the Dock Leveler in a reset state
    描述 (6)

    Video

    ELD Dock Leveler 43
    COMPANY STRENGTH
    Our in-house designers and engineers have produced countless great designs for customers from different industries
    ELD Dock Leveler 44
    COMPANY STRENGTH
    Our in-house designers and engineers have produced countless great designs for customers from different industries
    Feel Free To Contact With Us
    If you have any questions about our products or services, feel free to reach out to customer service team.
    Related Products
    no data
    Shanghai Fastlink Door Co., Ltd. is a globally leading provider of intelligent entrance solutions.
    +86 18017918270
    +86 4008806460
    Solution
    Company Address
    No. 325, Caoxin Road, Jiading District, Shanghai
    Contact us
    email
    whatsapp
    Contact customer service
    Contact us
    email
    whatsapp
    cancel
    Customer service
    detect